Sulat.com / Writing on AISunday, November 22, 2026
Engineering/22 November 2026

OpenCode takes 60% off GLM 5.3 and DeepSeek V4.1 Flash, below Fireworks and Baseten list prices

OpenCode's Console now lists GLM 5.3 at $0.56 input and $1.76 output, and DeepSeek V4.1 Flash at $0.12 and $0.48, per million tokens. Dax Raad says that's 60% below Fireworks and Baseten.

A glossy 3D OpenCode logo stands in a GPU data centre aisle as a soap bubble bursts behind it and blank price tags tumble through the air.

At a glance

  • OpenCode cut its Console prices for GLM 5.3 and DeepSeek V4.1 Flash by 60% on 22 November NZ, to $0.56 input and $1.76 output for GLM 5.3 and $0.12 and $0.48 for DeepSeek V4.1 Flash per million tokens.
  • Fireworks and Baseten list both models at OpenCode's old prices, so Dax Raad's claim of pricing 60% lower holds against list prices.
  • DeepSeek's own off-peak API rate is $0.15 and $0.60, and DeepInfra's promotional prices are lower than OpenCode's on DeepSeek V4.1 Flash output.
  • Raad's post gives no volume figures for OpenCode, Fireworks or Baseten, and OpenCode's last GPU figure, 54% of tokens on 19 November, doesn't break out which models run on its own hardware.

OpenCode has cut the Console price of GLM 5.3 and DeepSeek V4.1 Flash by 60%. The team behind the open-source coding agent announced it on X at 11:14am NZDT on 22 November, and Dax Raad, who builds OpenCode at Anomaly, followed two minutes later with the pitch: OpenCode is now pricing 60% below Fireworks and Baseten “while doing more volume than them”, all on its own GPUs. A token is the small chunk of text a model reads or writes.

OpenCode’s announcement on X, 22 November NZ.
Raad’s quote post, two minutes later.

What the new prices are

The Console pricing page now shows both models with the old price struck through. GLM 5.3 drops from US$1.40 to $0.56 per million input tokens and from $4.40 to $1.76 per million output tokens, while DeepSeek V4.1 Flash drops from $0.30 to $0.12 on input and from $1.20 to $0.48 on output. Cached reads, the cheaper rate for text a model has already seen, fall by the same 60%.

Model and token typeBeforeNow
GLM 5.3, input$1.40$0.56
GLM 5.3, cached read$0.26$0.104
GLM 5.3, output$4.40$1.76
DeepSeek V4.1 Flash, input$0.30$0.12
DeepSeek V4.1 Flash, cached read$0.006$0.0024
DeepSeek V4.1 Flash, output$1.20$0.48
OpenCode Console prices in US dollars per million tokens, as listed on 22 November NZ.
Before and after prices: GLM 5.3 input $1.40 to $0.56, output $4.40 to $1.76; DeepSeek V4.1 Flash input $0.30 to $0.12, output $1.20 to $0.48.
GLM 5.3 and DeepSeek V4.1 Flash both lose 60% of their old Console price.

A million input tokens plus a million output tokens on GLM 5.3 now costs $2.32 instead of $5.80, and on DeepSeek V4.1 Flash $0.60 instead of $1.50. GLM 5.3 Flash, the smaller GLM model, keeps its $0.15 and $0.50 price. The docs page lists end dates for its Gemini discounts and gives none for these 60% rows.

How it compares

Fireworks and Baseten both list the two models at the prices OpenCode just dropped from: $1.40 input and $4.40 output for GLM 5.3, and $0.30 and $1.20 for DeepSeek V4.1 Flash. Raad’s 60% is therefore right against list prices. The gap is smaller on one line, since Baseten lists GLM 5.3 cached reads at $0.14 against OpenCode’s $0.104, and Fireworks’ spot tier, which runs 30% under its standard rate, still sits above OpenCode at $0.98 and $3.08 for GLM 5.3 and $0.21 and $0.84 for DeepSeek V4.1 Flash.

DeepSeek’s own API charges $0.30 and $1.20 at peak and half that, $0.15 and $0.60, off-peak, so OpenCode’s $0.12 and $0.48 undercuts the model maker’s off-peak rate. DeepInfra is running promotions that go lower on some lines: DeepSeek V4.1 Flash at $0.14 input and $0.42 output, or $0.098 and $0.294 for the 1017 build, against OpenCode’s $0.48 output. On GLM 5.3 its promo input price of $0.5625 is level with OpenCode’s $0.56, and its $2.50 output price is above OpenCode’s $1.76. OpenCode isn’t the lowest listed price on every line. I read the Fireworks, Baseten, DeepSeek and DeepInfra pages on 22 November NZ.

Bar chart of DeepSeek V4.1 Flash output prices: Fireworks and Baseten $1.20, Fireworks spot $0.84, DeepSeek off-peak $0.60, OpenCode $0.48, DeepInfra promo $0.42.
OpenCode’s $0.48 sits under every list price here except DeepInfra’s promo.

What the post says beyond price

Raad says the prices work because everything runs on OpenCode’s own hardware. OpenCode said on 19 November that its own GPUs served 54% of its tokens that day, and Raad wrote on 17 November that it had 1,000 GPUs on short-term contracts. Neither post breaks out which models run on that hardware, so the 54% can’t be split between these two models and the rest.

The volume claim comes with no numbers either. OpenCode’s console page says it serves 600 trillion tokens a month, and Raad’s post gives no figure for Fireworks or Baseten to compare it with.

Checklist: the 60% price claim checks out against list prices; the volume claim has no numbers; the own-GPU claim isn't broken out by model.
Only the price claim comes with numbers anyone can check.

Discover more from Sulat AI & Tech News

Subscribe to get the latest posts sent to your email.